Category: Exoscope

Posted on

Taming the exoscope: a one‑year prospective laboratory training study

Acta Neurochirurgica (2023) 165:2037–2044

Digital 3D exoscopes have been recently introduced as an alternative to a surgical microscope in microneurosurgery. We designed a laboratory training program to facilitate and measure the transition from microscope to exoscope. Our aim was to observe the effect of a one-year active training on microsurgical skills with the exoscope by repeating a standardized test task at several time points during the training program.

Methods Two board-certified neurosurgeons with no previous exoscope experience performed the same test tasks in February, July, and November during a 12-month period. In between the test tasks, both participants worked with the exoscope in the laboratory and assisted during clinical surgeries on daily basis. Each of the test segments consisted of repeating the same task 10 times during one week. Altogether, 60 test tasks were performed, 30 each. The test task consisted of dissecting and harvesting the ulnar and radial arteries of the second segment of a chicken wing using an exoscope (Aesculap AEOS). Each dissection was recorded on video and analyzed by two independent evaluators. We measured the time required to complete the task as well as several metrics for evaluating the manual skills of the dissection and handling of the exoscope system.

Result There was a clear reduction in dissection time between the first and the last session, mean 34 min (SD 5.96) vs. 26 min (SD 8.69), respectively. At the end of the training, both neurosurgeons used the exoscope more efficiently utilizing more available options of the device. There was correlation between the dissection time and several of the factors we used for evaluating the work flow: staying in focus, zoom control, reduction of unnecessary movements or repetitive manual motions, manipulation technique of the vessel under dissection, handling of the instruments, and using them for multiple dissection purposes (stretching, cutting, and splitting).

Conclusion Continuous, dedicated long-term training program is effective for microsurgical skill development when switching from a microscope to an exoscope. With practice, the micromotor movements become more efficient and the use of microinstruments more versatile.

Posted on

Neurovascular Microsurgical Experience Through 3-Dimensional Exoscopy

World Neurosurg. (2023) 174:63-68

The microscope is important in neurosurgery, but it is not exempt from limitations. The exoscope has emerged as an alternative because it offers better 3-dimensional (3D) visualization and better ergonomics. We present our initial experience in vascular pathology using 3D exoscopy at the Dos de Mayo National Hospital to show the viability of the 3D exoscope in vascular microsurgery. We also provide a review of the literature.

METHODS: In this work, the Kinevo 900 exoscope was used in 3 patients with cerebral (2) and spinal (1) vascular pathology. We evaluated the image quality, equipment management, ergonomics, educational utility, and 3D glasses and recorded the characteristics of the cases. We reviewed the experience of other authors as well.

RESULTS: Three patients underwent surgery: 1 occipital cavernoma, 1 cerebral dural fistula, and 1 spinal dural fistula. Excellent 3D visualization with Zeiss Kinevo 900 exoscope (Carl Zeiss, Germany), surgical comfort, and educational utility occurred, and there were no complications.

CONCLUSIONS: Our experience and that of other authors suggests that the 3D exoscope shows excellent visualization, better ergonomics, and an innovative educational experience. Vascular microsurgery can be performed safely and effectively.

Posted on

Exoscope improves visualization and extent of hippocampal resection in temporal lobectomy

Acta Neurochirurgica (2023) 165:259–263

Anterior temporal lobectomy (ATL) is a safe and well-validated procedure in the treatment of temporal lobe epilepsy (TLE), but is a challenging technique to master and still confers a risk of morbidity and mortality due to the complex anatomy of the mesial temporal lobe structures. Automated robotic 3D exoscopes have been developed to address limitations traditionally associated with microscopic visualization, allowing for ergonomic, high-definition 3D visualization with hands-free control of the robot. Given the potential advantages of using such a system for visualization of complex anatomy seen during mesial structure resection in ATL, this group sought to investigate impact on the percentage of hippocampal resection in both exoscope and microscope guided procedures.

Methods We conducted a retrospective analysis of 20 consecutive patients undergoing standard ATL for treatment of medically refractory TLE at our institution. Using pre-operative and post-operative imaging, the coronal plane cuts in which either the head, body, or tail of the hippocampus appeared were counted. The number of cuts in which the hippocampus appeared were multiplied by slice thickness to estimate hippocampal length.

Results Mean percentage of hippocampal resection was 61.1 (SD 13.1) and 76.5 (SD 6.5) for microscope and exoscope visualization, respectively (p = 0.0037).

Conclusion Use of exoscope for mesial resection during ATL has provided good visualization for those in the operating room and the potential for a safe increase in hippocampal resection in our series. Further investigation of its applications should be evaluated to see if it will improve outcomes.

Posted on

Technical Assessment of Microvascular Decompression for Trigeminal Neuralgia Using a 3-Dimensional Exoscope

Operative Neurosurgery 23:374–381, 2022

Detailed anatomic visualization of the root entry zone of the trigeminal nerve is crucial to successfully perform microvascular decompression surgery (MVD) in patients with trigeminal neuralgia.

OBJECTIVE: To determine advantages and disadvantages using a 3-dimensional (3D) exoscope for MVD surgery.

METHODS: A 4K 3D exoscope (ORBEYE) was used by a single surgical team for MVD in a retrospective case series of 8 patients with trigeminal neuralgia in a tertiary center. Clinical and surgical data were collected, and advantages/disadvantages of using the exoscope for MVD were recorded after each surgery. Descriptive statistics were used to summarize the data.

RESULTS: Adequate MVD of the trigeminal nerve root was possible in all patients by exclusively using the exoscope. It offered bright visualization of the cerebellopontine angle and the root entry zone of the trigeminal nerve that was comparable with a binocular operating microscope. The greatest advantages of the exoscope included good optical quality, the pronounced depth of field of the image for all observers, and its superior surgeon ergonomics. Disadvantages were revealed with overexposure at deep surgical sites and the lack of endoscope integration. In 6 patients, facial pain improved significantly after surgery (Barrow Neurological Institute pain intensity score I in 5 and III in 1 patient), whereas it did not in 2 patients (Barrow Neurological Institute score IV and V). No complications occurred.

CONCLUSION: Utilization of a 3D exoscope for MVD is a safe and feasible procedure. Surgeons benefit from better ergonomics, excellent image quality, and an improved experience for observers.

Posted on

A high-definition 3D exoscope as an alternative to the operating microscope in spinal microsurgery

J Neurosurg Spine 33:705–714, 2020

Since the 1970s, the operating microscope (OM) has been a standard for visualization and illumination of the surgical field in spinal microsurgery. However, due to its limitations (e.g., size, costliness, and the limited movability of the binocular lenses, in addition to discomfort experienced by surgeons due to the posture required), there are efforts to replace the OM with exoscopic video telescopes. The authors evaluated the feasibility of a new 3D exoscope as an alternative to the OM in spine surgeries.

METHODS Patients with degenerative pathologies scheduled for single-level lumbar or cervical spinal surgery with use of a high-definition 3D exoscope were enrolled in a prospective cohort study between January 2019 and September 2019. Age-, sex-, body mass index–, and procedure-matched patients surgically treated with the assistance of the OM served as the control group. Operative baseline and postoperative outcome parameters were assessed. Periprocedural handling, visualization, and illumination by the exoscope, as well as surgeons’ comfort level in terms of posture, were scored using a questionnaire.

RESULTS A 3D exoscope was used in 40 patients undergoing lumbar posterior decompression (LPD) and 20 patients undergoing anterior cervical discectomy and fusion (ACDF); an equal number of controls in whom an OM was used were studied. Compared with controls, there were no significant differences for mean operative time (ACDF: 132 vs 116 minutes; LPD: 112 vs 113 minutes) and blood loss (ACDF: 97 vs 93 ml; LPD: 109 vs 55 ml) as well as postoperative improvement of symptoms (ACDF/Neck Disability Index: p = 0.43; LPD/Oswestry Disability Index: p = 0.76). No intraoperative complications occurred in either group. According to the attending surgeon, the intraoperative handling of instruments was rated to be comparable to that of the OM, while the comfort level of the surgeon’s posture intraoperatively (especially during “undercutting” procedures) was rated as superior. In cases of ACDF procedures and long approaches, depth perception, image quality, and illumination were rated as inferior when compared with the OM. By contrast, for operating room nursing staff participating in 3D exoscope procedures, the visualization of intraoperative process flow and surgical situs was rated to be superior to the OM, especially for ACDF procedures.

CONCLUSIONS A 3D exoscope seems to be a safe alternative for common spinal procedures with the unique advantage of excellent comfort for the surgical team, but the drawback is the still slightly inferior visualization/illumination quality compared with the OM.

Proudly powered by WordPress
%d bloggers like this: