J Neurosurg Spine 41:209–215, 2024
Expandable transforaminal lumbar interbody fusion (TLIF) cages were designed to address the limitations of static cages. Bilateral cage insertion can potentially enhance stability, fusion rates, and segmental lordosis. However, the benefits of unilateral versus bilateral expandable cages with varying sizes in TLIF remain unclear. This study used a validated finite element spine model to compare the biomechanical properties of L5–S1 TLIF by using differently sized expandable cages inserted unilaterally or bilaterally.
METHODS A finite element model of X-PAC expandable lumbar cages was created and used at the L5–S1 level. This model had cage dimensions of 9 mm in height, 15° in lordosis, and varying widths and lengths. Various placements (unilateral vs bilateral) and sizes were examined under pure moment loading to evaluate range of motion, adjacent-segment motion, and endplate stress.
RESULTS Stability at the L5–S1 level decreased when smaller cages were used in both the unilateral and bilateral cage models. In the unilateral model, cage 1 (the smallest cage) resulted in 47.9% more motion at the L5–S1 level compared to cage 5 (the largest cage) in flexion, as well as 64.8% more motion in extension. Similarly, in the bilateral TLIF model, bilateral cage 1 led to 49.4% more motion at the L5–S1 level in flexion and 73.4% more motion in extension compared to bilateral cage 5. Unilateral insertion of cage 5 provided superior stability in flexion and surpassed cages 1–3 in extension when compared to cages inserted either unilaterally or bilaterally. Reduced motion at L5–S1 correlated with increased adjacent-segment motion at L4–5. Bilateral TLIF resulted in greater adjacent-segment motion compared to unilateral TLIF with the same-size cages. Inferior endplates experienced higher stress during flexion and extension than superior endplates, with this difference being more pronounced in the bilateral model. In bilateral cage placement, stress differences ranged from 46.3% to 60.0%, while they ranged from 1.1% to 9.6% in unilateral cages. Qualitative analysis revealed increased focal stress in unilateral cages versus bilateral cages.
CONCLUSIONS The authors’ study shows that using a large unilateral TLIF cage may offer better stability than the bilateral insertion of smaller cages. While large bilateral cages increase adjacent-segment motion, they also provide a uniform stress distribution on the endplates. These findings deepen our understanding of the biomechanics of the available expandable TLIF cages.
You must be logged in to post a comment.